YMGI: Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
35
2. Instructions to the Error Indicating Lamps on the Panel of the Cassette Type Unit.
Power and ON/OFF Indicating Lamp:
The indicator lamp will turns red when the unit is powered on. The indicator lamp will turn white when the unit is started.
Timer Indicating Lamp:
Timer indicator on indoor unit will be lit when the TIMER ON is set while the unit is turned off, or when the TIMER OFF is
set while the unit is turned on.
“88” Display:
When there is no error, the dual-8 nixie tube display the set temperature.
After receiving the command to display the indoor ambient temperature from the remote controller, the Indoor Unit will
display the room temperature for 3s and then resume to display the set temperature.
If there is error, the error code will be displayed.
If there are multiple errors, the error codes will be displayed in sequence.
AUTO button:
Used for turning on or turning off the unit. When this button is used to turn on the unit, it will power on the unit, and
automatically go into AUTO mode.
TEST button:
Used to test the units. This button is only valid for the first 3 minutes after the unit is energized
NOTE:
1. If the Display Light on the indoor unit is turned off, when the remote controller is used to send the unit a
command, the display will turn on for 3s and then back to off.
2.
When the wired controller is connected to the unit, the indoor unit display is disabled,
and the unit won’t receive
the remote control command. Point your remote at the wired controller instead of at the display of the unit.