YMGI: Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
40
Preparation before Operation
When using the remote control for the first time or after replacing the batteries, please set the system time to the current
time in the following steps:
Press the CLOCK button. The
icon will begin blinking.
Press the ▲ or ▼ button. The clock time will increase or decrease.
Press CLOCK button again to confirm the time. The
icon will stop blinking. The display will show current time.
Introduction of operation functions
Selecting operation MODE
In unit ON status, press MODE button to select operation mode in the following sequence.
Setting Temperature
When the unit is in powered
ON status, press ▲ button to increase set temperature and press ▼ button to decrease
set temperature. The range of temperature is from 60.8°F - 86°F (16°C - 30°C).
NOTE:
Under AUTO MODE, the system is automatically set to 76°F, and cannot be adjusted manually.
Fan Speed
In unit ON status, press the FAN button to adjust the fan speed in the following sequence:
When operation mode changes, the fan speed is saved.
Under dry (dehumidify) mode, the fan speed is set to low and cannot be adjusted.
Swing Function
Left and Right SWING
1. In SWING status, press
button to adjust left and right SWING status.
2. In fixed-angle SWING status, press
button to adjust left and right SWING angle. The settings cycle
will follow the sequence below:
NOTE:
Left/Right SWING will operate continuously in 2 second cycles. Swing states will change accordingly to the sequence
displayed above, or switch to CLOSED state and
state.