YMGI PTAC Series, Инструкции по установке и Руководство пользователя

Страница: 22 / 52

YMGI
•
Your Modern Green Idea
22
WALL SLEEVE ASSEMBLY
(OPTIONAL ACCESSORY)
Two kinds of wall sleeve are optional for customers, one is reassemble wall sleeve and the other one is a
welded integrated wall sleeve.
Removable Wall Sleeve
The removable wall sleeve can be removed and occupies less space and is convenient to transport.
Follow the below steps to install:
1.
Unpack all parts and accessories, referring to Fig 1.
2.
Assemble the wall sleeve by first “clip locking” the side pieces to the bottom piece.
3.
Assemble the top piece to the assembled side and top piece.
Welded integrated wall sleeve
Welded integrated wall sleeve is featured by artistic appearance and stable structure referring to Fig 2.
SLEEVE INSTALLATION
Wall sleeve location
When making the wall opening, please observe the following requirement:
A.
The air inlet and outlet should be unblocked and the air can be delivered to every corner of the room
B.
Install the unit in places that are away from heat source or sources of flammable gases.
C.
Do not install the unit in places that are subject to strong dust
D.
Do not install the unit in places where the operational noise and exhausted air might trouble your neighbor.
E.
There should be sufficient space margins around the unit to facilitate maintenance and repairs
(refer to Figs 3 and 4)
Dimensions Recommended installation clearance
D1
Projection of case into room-1/2"minimum up to1-3/4"maximum without use of electrical sub-base.
Note: 2-3/8" minimum when sub-base is used.
D2
Height above finished floor or top of carpet-1/2"minimum,
2" recommended without sub-base-3" minimum with sub-base