YMGI PTAC Series, Инструкции по установке и Руководство пользователя

Страница: 29 / 52

YMGI
•
Your Modern Green Idea
29
INSTALLATING ARCHITECHTURAL EXTRUDED ALUMINUM GRILLES
NOTE
Some PTACs may include factory-installed baffles on the outdoor coil. Remove these baffles before installing
the architectural grille.
1. Remove the cardboard sleeve stiffener and the rear
enclosure of the sleeve as described on the previous
page.
2. Install the four threaded studs (B, Figure 4) into the
threaded openings on the inside face of the grille.
3. Manipulate the grille out through the rear sleeve opening
using the plastic handle provided.
Be sure to keep a firm grip on the plastic handle and grille to prevent it from dropping and /or
causing possible injury or property damage.
4. Attach the grille to the sleeve by aligning and inserting the threaded studs in the corresponding holes.
5. Secure the grille to the sleeve with washers C and hex nuts D provided with the kit.
6.
Remove the plastic handle after installation is completed.