E
MAX YIN YAN MODEL TECH.MFT.
Note:
1. 1 long “beep-----” = 5 short “beep-”. For example, in “Li-xx Cells Number” setting, 1 long “beep-----” plus 1 short
“beep-” (5+1=6) means a 6 cells Li-xx battery pack.
2. The boldface in above form is the default value.
3. Low voltage Protection threshold (Cutoff voltage) = Li-xx Cells Number * Cutoff threshold. Cutoff threshold is
Protection threshold for one cell Li-xx. For example: if Li-xx Cells Number is 3 and Cutoff threshold is 3.1V, the cutoff voltage will
be: 3.1V*3=9.3V.
4. In step 2, after 3 long tone (The item #11)
,
if release the “SET” KEY within 2 seconds, you will exit program. But if you
don’t change other item value, the ESC will restore all items to default value, and makes two “beep-” sounds.
Wiring the ESC
FAN
RECEIVER
KEY
BATTERY
MOTOR
SWITCH
BAT+
BAT-
RED
BLACK
E S C F O R C A R
Throttle Diagram
Top Point of Forward
Forward Zone
Neutral Zone
Neutral Point
Backward and Brake Zone
Top Point of Backward
Top Point of Forward
Top Point of Backward
Forward Zone
Backward and Brake Zone
Neutral Zone
Neutral Point
4