E
MAX YIN YAN MODEL TECH.MFT.
Programming the ESC with keys
2.
Select programmable items
After entering program mode,
hold the “
SET” KEY
continuously, you will hear 11 tones and
red led
flash in a loop
in the following sequence. If you release the “
SET”
KEY
within 2 seconds after one kind of tone, this item will be
selected, and enter step 3
⑴“
beep-
”
(1 short tone,
red led
flash 1 short times)
Brake Force
⑵“
beep- beep-
”
(2 short tone,
red led
flash 2 short times)
Drag Brake
⑶“
beep- beep- beep-
”
(3 short tone,
red led
flash 3 short times)
Run Mode
⑷“
beep- beep- beep- beep-
”
(4 short tone,
red led
flash 4 short times)
Start Force
⑸“
beep-----
”
(1 long tone,
red led
flash 1 long times)
Li-xx cells
⑹“
beep----- beep-
”
(1 long 1 short tone,
red led
flash 1 long times and 1 short times)
Cutoff threshold
⑺“
beep----- beep- beep-
”
(1long 2 short tone,
red led
flash 1 long times and 2 short times)
Timing
⑻“
beep----- beep- beep- beep-
”
(1 long 3 short tone,
red led
flash 1 long times and 3 short times)
Neutral Range
⑼“
beep----- beep- beep- beep- beep-
”
(1 long 4 short tone,
red led
flash 1 long times and 4 short times)
Initial Brake
Force
(10)
“
beep----- beep-----
”
(2 long tone,
red led
flash 2 long times)
Reverse Force
(11)
“
beep----- beep----- beep-----” (3 long stone,
red led
flash 3 long times)
Restore all to default and
Exit
Note:
1 long “beep-----” = 5 short “beep-”, flash 1 long times=5 short times
3.Set item value
After entering the item, you will hear several tones and
green led
flash in loop, Set the value matching to a tone by press the “
SET”
KEY
within
2 second when you hear the tone, then you will hear special tone like
“
♪
5 6 5 6”.
It means the value is set and saved.
Hold the
SET KEY
for 3 second, you will go back to step 2. if release the
SET KEY
within 2 second, you will exit the program mode quickly.
Tone
Items
beep-,1 tone
green led
flash
1 short time
beep-beep-,2 tone
green led
flash
2 short times
beep-..,3 tone
green led
flash
3 short times
beep-…,4 tone
green led
flash
4 short times
beep-----,1 long
tone green led
flash 1 long time
beep-…..,N tones
green led
flash N times
1. Brake Force
50% 75%
100%
2. Drag Brake
0
5% 10%
15% 20%
3. Run Mode
ONE TWO
TWO2
4. Start Force
20% 25%
30%
35% 40%
5.Li-xx Cells Number
Auto detect
2 cells
3 cells
4cells
5 cells
N cells
6.Cutoff threshold
2.5V
2.8V
3.1V
7. Timing
Low
Mid
High Highest
8.Neutral Range
6
％
8
％
10
％
9.Initial Brake Force
5
％
10
％
20
％
30
％
10.Reverse Force
25
％
50
％
75
％
100
％
4.Exit program
There are two ways to exit program mode:
1 In step 2, after 3 long tone (The item #11)
，
please release the
KEY
within 2 seconds.
2 In step 3,after special tone
“
♪
5 6 5 6
”
,
please release the
KEY
within 2 seconds.
1.Enter program mode
1 Turn off the ESC, Switch on transmitter, keep throttle stick to the
neutral position
2 Press and hold the “
SET”
KEY
, Switch on the ESC
3 Wait for 3 seconds, special tone like
“
♪
i3i3”
should be emitted,
which means program mode is entered
3
