NR130 5G Router User Manual
www.yifanwireless.com
53
Copyright @ Yifan 2021
Baudrate:
Baud rate indicates the number of bytes per second transported by device, commonly
used baud rate is115200, 57600, 38400, 19200.
Databit:
The data bits can be 4, 5, 6, 7, 8, constitute a character. The ASCII code is
usually used. Starting from the most significant bit is transmitted.
Stopbit:
It marks the end of a character data. It is a high level of 1, 1.5, 2.
Parity:
Use a set of data to check the data error.
Flow Control:
Including the hardware part and software part in two ways.
Enable Serial TCP Function:
Enable the serial to TCP function
Protocol Type:
The protocol type to transmit data.
UDP(DTU)
– Data transmit with UDP protocol, work as a Yifan IP MODEM device
which has application protocol and hear beat mechanism.
Pure UDP
– Data transmit with standard UDP protocol.
TCP(DTU) -- Data transmit with TCP protocol, work as a Yifan P MODEM device
which has application protocol and hear beat mechanism.
Pure TCP -- Data transmit with standard TCP protocol, router is the client.
TCP Server -- Data transmit with standard TCP protocol, router is the server.
TCST -- Data transmit with TCP protocol, Using a custom data
Server Address:
The data service center’s IP Address or domain name.
Server Port:
The data service center’s listening port.
Device ID:
The router’s identity ID.
Device Number:
The r
outer’s phone number.
Heartbeat Interval:
The time interval to send heartbeat packet. This item is valid
only when you choose UDP(DTU) or TCP(DTU) protocol type.
TCP Server Listen Port:
This item is valid when Protocol Type is “TCP Server”
Custom Heartbeat Packet:
This item is valid when Protocol Typ
e is “TCST”
Custom Registration Packets:
This item is valid when Protocol Type is “TCST”
