NR130 5G Router User Manual
www.yifanwireless.com
20
Copyright @ Yifan 2021
Networking
Bridging-Create Bridge:
Creates a new empty network bridge for later use. STP
means Spanning Tree Protocol and with PRIO users can set the bridge priority order.
The lowest number has the highest priority.
Bridging - Assign to Bridge:
Allows users to assign any valid interface to a network
bridge. Consider setting the Wireless Interface options to Bridged if they want to assign
any Wireless Interface here. Any system specific bridge setting can be overridden here in
this field.
Current Bridging Table:
Shows current bridging table
Create steps as below:
Click 'Add' to create a new bridge, configuration is as below:
Create bridge option: the first br0 means bridge name. STP means to on/off spanning tree
protocol. Prio means priority level of STP, the smaller the number, the higher the level.
MTU means maximum transfer unit, default is 1500, delete if it is not need. And then click
'Save' or 'Add'. Bride properties is as below:
