NR130 5G Router User Manual
www.yifanwireless.com
14
Copyright @ Yifan 2021
configure "Detection Interval" item.
Detection Interval:
Time interval between two detections, unit is second
Primary Detection Server IP:
The server used to response the
Router’s detection
packet. This item is only valid for method "Ping" and "Route".
Backup Detection Server IP:
The server used to response the Router’s detection packet.
This item is valid for method "Ping" and "Route".
Note:
When users choose the “Route” or “Ping” method, it’s quite important to make sure
that the “Primary Detection Server IP” and “Backup Detection Server IP” are usable and
stable, because they have to response the detection packet frequently.
Force Reconnect:
This option schedules the PPPOE or 3G reconnection by killing the
PPPD daemon and restart it.
Time:
Needed time to reconnect
11. STP
STP (Spanning Tree Protocol) can be applied to loop network. Through certain algorithm
achieves path redundancy, and loop network cuts to tree-based network without loop in
the meantime, thus, to avoid the hyperplasia and infinite circulation of a message in the
loop network
12. Optional Configuration
Router Name:
Set Router name
Host Name:
ISP provides
Domain Name:
ISP provides
MTU:
Auto (1500) and manual (1200-1492 in PPPOE/PPTP/L2TP mode, 576-16320 in
other modes)
