12
maintenance
maintenance
maintenance
Yeti has outlined below the service and maintenance that can and should be performed
by the owner and requires no special tools. Following these guidelines will help maintain the performance
of your bicycle and prevent more serious problems from arising. this guide is by no means an absolute
rule which to follow. Common sense should be practiced and if an issue surfaces before the maintenance
schedule interval, visit an authorized dealer for inspection and or maintenance.
Caution:
The torque specifications listed should be used as a guide when performing maintenance. Technological
advances have made bicycles and bicycle components more complex, and the pace of innovation is increasing.
Because of these advances, YETI recommends that you refer to the torque specifications of the manufactures
component you are adjusting. In order to help minimize the chances of an injury, do not perform any maintenance that
you are not confident can be completed within your abilities.
maintenance?
if you are having trouble with any of the
maintenance tasks that need to be performed contact your
local dealer or visit www.parktool.com and check out the
repair help section. this section contains detailed instruction
on many of the service items listed in the maintenance
schedule.
torque
Yeti has outlined a brief list of torque specifications for bolts and components that may need to
be tightened while performing basic maintenance. this is by no means a comprehensive list, just a guide.
if a bolt or component needs to be tightened that is not encompassed by this list, refer to the specific
manufactures torque specification guide.
torque specs
pivot Bolts
125 -150
Derailleur Hanger Bolts
30 -45
Handlebar Binder Bolt
150 -180
stem Binder Bolt
175 -260
seatpost Binder Bolt
150 -180
saddle Clamp Bolts
175 -250
rear Derailleur
70 -86
Front Derailleur Clamp
45 -60
Chainring Bolts
88 -132
action
weekly
monthly
3 months
annually
Clean and lube Chain
x
Check tire pressure
x
Clean bike of mud and debris (never
spray water directly into frame or
components)
x
Check brake function
x
Check shock pressure, if applicable
x
Check for loose bolts and tighten if
necessary
x
Check headset and tighten/loosen if
necessary
x
thoroughly clean pivot points with a
rag (do not lubricate)
x
replace brake pads if necessary
x
Check tires for wear
x
Check spoke tension, and retention if
necessary
x
Check chain for worn, damaged, or
loose links. replace chain if necessary
x
Complete tune-up performed by an
authorized Yeti dealer
x
