background image

36

warranty

warranty

yeti limited (2) two year frame warranty

 (applies to 303, DH-9, as-X, 4X, DJ)

Yeti Cycles will repair or replace, at its option, any frame it determines to be defective due to defective 
materials and/or workmanship. the (2) two year limited warranty is conditioned upon the bicycle being 
ridden under normal conditions and having been properly maintained. this warranty does not apply to the 
components attached to the frameset such as suspension components, wheels, drive train, brakes, seatpost, 
handlebar and stem. this warranty applies only to the original owner and is non-transferable. this warranty is 
void if the bicycle was not properly assembled by an authorized Yeti dealer.

yeti limited (5) five year frame warranty

 

(applies to as-r-sl, as-r, 575, arC, Fro, kokopelli

)

Yeti Cycles will repair or replace, at its option, any frame it determines to be defective due to defective 
materials and/or workmanship. the (5) five year limited warranty is conditioned upon the bicycle being 
ridden under normal conditions and having been properly maintained. this warranty does not apply to the 
components attached to the frameset such as suspension components, wheels, drive train, brakes, seatpost, 
handlebar and stem. this warranty applies only to the original owner and is non-transferable. this warranty is 
void if the bicycle was not properly assembled by an authorized Yeti dealer.

additional conditions

these limited warranties do not apply to normal wear and tear, nor to claimed defects, malfunctions or 
failures that result from abuse, neglect, improper assembly, improper maintenance, alteration, collision, 
crash or misuse. the original owner shall pay all labor charges connected with the repair or removal of all 
components. Under no circumstance does this limited warranty include the cost of travel or shipment to and 
from an authorized Yeti dealer. in order to exercise your rights under these limited warranties, the bicycle or 
frameset must be presented to an authorized Yeti dealer, together with proof of purchase.

The above warranties have been in effect since January 2000. All Yeti frames sold prior to that date 

 

ū

had a limited (1) one year warranty on the frameset.
No Fault Replacement Policy

 

ū

Yeti Cycles will make replacement parts available at a minimum charge to the original owner in the 

 

ū

event of a crash or any other non-warranty situation. Yeti Cycles does this at its sole discretion and 
reserves the right to refuse this offer.
If you have a warranty concern, please contact your authorized Yeti dealer.

 

ū

no fault replacement policy

Yeti Cycles will make replacement parts available at a minimum charge to the original owner in the event of a 
crash or any other non-warranty situation. Yeti Cycles does this at its sole discretion and reserves the right to 
refuse this offer. if you have a warranty concern, please contact your authorized Yeti dealer.

product life cycle

every Yeti frameset has a useful product life cycle.  the length of that useful product life cycle will vary 
depending on the construction and the materials of the frameset, maintenance and care the frameset 
receives , and the amount and type of use the frameset is subjected to over its life. Yeti recommends that 
an authorized Yeti dealer should inspect the  frame for stress  annually. Frame stress could cause potential 
failure and the signs are usually apparent in the form of cracks, fracture lines, deformation, dents, , and any 
other visual indicators of abnormality. these safety check for frame stress are important to prevent accidents, 
injury to the cyclist, and product failure of a Yeti frameset.

disclaimer

Yeti Cycles is not responsible for any damages to you or others arising from riding, transporting or other 
use of your bicycle. in the event that your frame breaks or malfunctions, Yeti Cycles shall have no liability or 
obligation beyond the repair or replacement of your frame pursuant to the terms outlined in the warranty.

contact info

Yeti Cycles
600 Corporate Circle, Unit D
Golden, Co 80401
(p) 303-278-6909
(f) 303-278-6906

WWW.YetiCYCles.CoM

business hours

Monday-Friday 
8aM-11:30aM, 1:00pM-5:30pM 
(Mountain time)

Содержание ASX '07



















Отзывы: