Yeswelder YWM-211P, Руководство оператора

Страница: 21 / 40

How To Choose Manual MIG
Manual MIG allows separate setting for welding parameters such as the wire feed speed and voltage. Refer to weld chart along with
the package for proper parameter settings according to wire type, shielding gas, and material type and thickness.
Details for Setting for Manual MIG
Mode: Torch Mode Weld Spec Value
Manual MIG
Syn off
2T/4T/4TL/Spot ind
：
(-10~10)(%)
2T/4T/4TL/Spot rin 0~10(%)
2T/4T/4TL/Spot hs 0~10(%)
2T/4T/4TL/Spot prg 0~20s
2T/4T/4TL/Spot pog 0~20s
2T/4T/4TL/Spot bbt 0~10(%)
2T/4T/4TL/Spot syn 0ff/0n
4TL I1(Stop Amperage) 1.5~15m/min
4T/4TL I2(Stop Amperage) 1.5~15m/min
4TL U1(Start Voltage) 9~27.5V
4T/4TL I2(Stop Amperage) 9~27.5V
SPOT SPT 0~15s
110V/220V
Material Size Voltage
Wire feed speed
m/min
AL Si
0.9mm/.035"
1.2mm/.045"
9~27.5V 1.5~15m/min
Al Mg
0.9mm/.035"
1.2mm/.045"
SS 0.8mm/.030"
SS 0.9mm/.035"
Fe Mix 0.6mm/.023"
Fe Mix 0.8mm/.030"
Fe Mix
0.9mm/.035"
Fe CO
2
0.6mm/.023"
Fe CO
2
0.8mm/.030"
Fe CO
2
0.9mm/.035"
1. Enter the menu button (6).
2. Select the weld spec.
3. Find the parameter Syn and turn off it via value adjustment knob (1).
4. Adjust the adjustment knob (1) to change the wire feeding speed (WFS).
5. Adjust the Function knob (2) to change the output Voltage.
- 17 -