39
Recording
When you stop recording, your iXm will transfer remaining audio to the
SD memory card. Please wait until this process is finished and until the
REC LED stops flashing.
NOTE: Be aware that this can take a couple of seconds.
Never turn off the iXm before the red light stops flashing.
Connect a headphone to the green H/P output on the port panel. Plug
in your headphones and listen to your recording live.
NOTE:
To provide a zero latency signal the H/P signal will
not be LEA processed. That is why your H/P signal may
sound distorted while your recorded signal will not be
affected!
In order to change the volume while listening, you can use the FFW and
REW buttons on the playback keypad in order to increase or decrease
the H/P volume. Push to increase/decrease the volume in steps of 1dB
or hold the button to increase/decrease volume by 1dB per second.
First, you need to activate the option in the iXm Admin Software. You
need headphones plugged into the H/P-Out of the port panel in order
to monitor your recording.
How can I
monitor my recordings
?
What happens
after the recording
?
How can I avoid to
accidentally stop a
recording
?
For additional safety, you can make a setting that only allows you to
end your recordings by double-pushing the STOP button. Setup this
option via iXm Admin Software.
Содержание iXm
Страница 1: ...DE EN briefing book ...
