37
Recording
NOTE: Before turning on your iXm make sure that a
memory card with some minimum storage capacity is
properly inserted into the SD card slot of the port panel.
Press REC on the record keypad and STOP on the playback keypad
simultaneously. Your iXm‘s booting sequence now initiates. The boot
sequence may take up to 15 seconds depending on the memory
capacity of the SD card. Please refer to section “Dashboard Indicators“
for explanation of LED signals.
The iXm is now ready to record at any time!
How do I
turn on my iXm
?
Press STOP on the dashboard and the STOP button on the playback
keypad simultaneously to shut the iXm down.
NOTE: In some situations you will not be able to shut down
your iXm. This is to prevent unwanted loss of data. You will
not be able to shut down the microphone when:
•
iXm is performing a recording
•
iXm is connected to a PC via USB
•
iXm is being charged (via USB)
How do I
turn off my iXm
?
Simply press REC after your iXm has been turned on. To stop the
recording you have to press the STOP button and wait for the audio
to be saved to your SD card.
Several recording modes (pre-roll / voice activation) are available
and can be selected with the help of the iXm Admin Software.
How do I
make a recording
?
Содержание iXm
Страница 1: ...DE EN briefing book ...
