Yellowtec iXm, Руководство по эксплуатации

Страница: 9 / 36

9
www.yellowtec.com I info@yellowtec.com
Basic functions
Recording great audio with iXm is easy. There is no need to monitor a
display as our amazing LEA Engine will always deliver a perfect level-
ling. iXm takes care of this automatically for you, producing broadcast-
ready recordings at the touch of a button. Try it now - here‘s all you
need to do:
Power On
Press and hold the RECORD Button and simultaneously
press the STOP Button on the Playback Keypad. When
the boot sequence starts you can release the buttons.
Wait until the REC LED stops quick flashing. Your iXm is
now ready to record. (See table of indicators)
Record
To start a recording simply hit the RECORD button.
Once the REC LED shows red you are capturing every
word. During a recording simply press the RECORD
button again to set track markers on the fly, at any
time.
Stop and Save
To finish your recording, hit the STOP Button on the
RECORD Keypad. The REC LED will quickly flash to
indicate correct data transfer to the SD card memory.
Once the quick flashing ends your iXm is ready for your
next recording.
Playback
To check recorded audio in the field use the Playback
Keypad to navigate through your recording. Connect a
headphone to the 3.5mm Mini Jack on the Port Panel.
Voice announcments will guide you through your
tracks as you listen.