Yellowtec iXm, Руководство по эксплуатации

Страница: 13 / 36

13
www.yellowtec.com I info@yellowtec.com
Dashboard indicators
The REC LED will illuminate green during PlayBack. Play Back can always
be interrupted by hitting the REC Button. Once powered up iXm is
always in one of the seleceted Record Ready modes.
During recording you can use the REC Button to set markers. Due to
it‘s click-free design you will not suffer from any audible noise. Setting
markers will be tallied by a double flashing REC LED.
4. Markers
Triple flashes will indicate Record Ready with Voice Activation active:
Once you have started your recording the REC LED will light red:
When you stop the recording the REC LED will quick flash red for a very
short period of time which indicates the remaining audio data is being
transferred to the SD memory card. When the transfer is finished (after
approx 1 sec) the REC LED will switch back to indicate Record Ready.
5. End of recording
When the iXm is connected to a power source via USB. The internal bat-
tery is being automatically charged. The BAT LED will slowly flash amber
to indicate charging. You do not need to have your iXm switched on for
charging. When charging is completed the BAT LED will stop flashing.
6. BAT LEDs