yellow jacket 40870, Руководство пользователя

Страница: 7 / 31

4
Interacting with the device:
The P51-870 TITAN® features a 4.3” full color resistive
touchscreen for improved usability and durability. To
interact with the device, use a finger or stylus to touch
anywhere on the screen. All interactive buttons are
conveniently displayed with the same golden yellow
color as seen in Figures 4 & 5. The only exception to this
rule is the interaction with the gauge and graphs in
Pressure/Temperature mode.
Resistive touchscreens are resistant to impact and various
chemicals, compatible with all types of stylus, and are not
susceptible to grease and moisture. While more durable, a
resistive touchscreen requires a larger input force to
register a touch then other common touchscreen types.
Using a fine tipped stylus or fingernail can greatly improve
interaction with the device. For instructions on
touchscreen calibration, see page 21.
Connecting and Using the Temperature Clamps:
Two (67010) temperature clamps, pictured in Figure 6, are supplied
with the P51-870 TITAN® and can be used to monitor system
temperature, superheat and subcooling. To connect the sensors to the
device, remove the clear silicone plugs from the back of the device
covering connectors T1 and T2. Insert the male temperature clamp
connectors into either the T1 or T2 connectors (shown in Figure 7
below). Attach the clamps to the point on the system where it is
desired to measure temperature. Ensure that both jaws of the clamp
are well secured and the metal temperature probe on the upper jaw is
flush with the surface to be measured.
When not in use, the temperature clamps can be conveniently stored by attaching the clamps to
the two mounting pegs located on the back of the device.
Figure 4: Pressure/Temperature Mode Interaction
Figure 5: Device Settings Interaction
Figure 6: 67010 Included Temp
Probes
Figure 7: Connecting the Temp Probes