Yealink W60P Telesystem, Руководство администратора

Страница: 219 / 264

Administrator’s Guide for W60P/W53P/W41P DECT Phones
212
2 -PAI-FROM
3 -PRID-PAI-FROM
4 -PAI-RPID-FROM
5 -RPID-FROM
6 -PREFERENCE, the IP phone uses the custom priority order for the sources of caller identity (configured
by the parameter “sip.cid_source.preference”).
Default 0
Web UI Account->Advanced->Caller ID Source
Parameter
account.X.cid_source_privacy
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to process the Privacy header field in the SIP message.
Note : The priority order: PPI>Privacy>PRID/PAI/From
Permitted
Values
0 -Disabled, the IP phone does not process Privacy header.
1 -Enabled, the phone screen presents anonymity instead if there is a Privacy: id in the INVITE request.
Default 1
Parameter
account.X.cid_source_ppi
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to process the P-Preferred-Identity (PPI) header in the request message
for caller identity presentation.
Permitted
Values
0 -Disabled, the IP phone does not process the P-Preferred-Identity (PPI) header.
1 -Enabled, the IP phone presents the caller identity from the P-Preferred-Identity (PPI) header.
Default 0
Parameter sip.cid_source.preference <y0000000000xx>.cfg
Description
It configures the priority order for the sources of caller identity information. The headers can be in any
order.
Note : Yealink IP phones can derive caller identity from the following SIP headers: From, P-Asserted-Iden-
tity (PAI), P-Preferred-Identity and Remote-Party-ID (RPID). It works only if “account.X.cid_source” is set
to 6 (PREFERENCE).
Permitted
Values
String
Default P-Preferred-Identity, P-Asserted-Identity, Remote-Party-ID, From
Parameter
account.X.cp_source
[1]
<MAC>.cfg
Description It configures the identity of the callee according to the response message.
Permitted
Values
0 -PAI-RPID
1 -Dialed Digits
2 -RFC4916, the caller sends the SIP request message which contains the from-change tag in the Sup-
ported header. The caller then receives an UPDATE message from the server, and displays the identity in
the “From” header.
Default 0
[1]
X is the account ID. X=1-8.