Yealink W60P Telesystem, Руководство администратора, Страница: 39 / 264

Administrator’s Guide for W60P/W53P/W41P DECT Phones
32
Default 30
Web UI Account->Advanced->Keep Alive Interval(Seconds)
[1]
X is the account ID. X=1-8.
Rport Configuration
Yealink IP phones support rport described in RFC 3581 . It allows a client to request that the server sends the response
back to the source port from which the request came.
Rport feature depends on support from a SIP server.
The following table lists the parameter you can use to configure rport.
Parameter account.X.nat.rport
[1]
<MAC>.cfg
Description It enables or disables the NAT Rport feature.
Permitted Values
0 -Disabled
1 -Enabled
2 -Enable Direct Process
Default 0
Web UI Account->Advanced->RPort
[1]
X is the account ID. X=1-8.
SIP Port and TLS Port Configuration
You can configure the SIP and TLS source ports on the IP Phone. Otherwise, the IP phone uses default values (5060 for
UDP/TCP and 5061 for TLS).
If NAT is disabled, the port number shows in the Via and Contact SIP headers of SIP messages. If NAT is enabled, the
phone uses the NAT port number (and NAT IP address) in the Via and Contact SIP headers of SIP messages, but still
using the configured source port.
The following table lists the parameters you can use to configure SIP port and TLS port.
Parameter sip.listen_port <y0000000000xx>.cfg
Description It configures the local SIP port.
Permitted Values Integer from 1024 to 65535
Default 5060
Web UI Settings->SIP->Local SIP Port
Parameter sip.tls_listen_port <y0000000000xx>.cfg
Description
It configures the local TLS listen port.
If it is set to 0, the IP phone will not listen to the TLS service.
Permitted Values 0, Integer from 1024 to 65535
Default 5061