Yealink W60P Telesystem, Руководство администратора

Страница: 215 / 264

Administrator’s Guide for W60P/W53P/W41P DECT Phones
208
1 -Headset Mode
Default 1
Parameter custom.handset.auto_intercom <y0000000000xx>.cfg
Description
It configures whether the DECT IP phone automatically answers an incoming internal intercom call and
plays a warning tone.
Note: It works only if “static.auto_provision.handset_configured.enable” is set to 1 (Enabled). It is not
applicable to DD phones.
Permitted
Values
0 -Off, users need to answer incoming internal intercom calls manually.
1 -On(Beep Off), the handset will answer an incoming internal intercom call automatically without a
warning tone.
2 -On(Beep On), the handset will answer an incoming internal intercom call automatically and play a
warning tone. It works when the silent mode is off.
Default 0
Handset UI OK->Settings->Telephony->Auto Intercom
Voice Mail
Yealink IP phones support voice mail.
You can configure a message waiting indicator (MWI) to inform users that how many messages are waiting in their
mailbox without calling the mailbox. Yealink IP phones support both audio and visual MWI alert when receiving new
voice messages.
Topic
MWI for Voice Mail Configuration
MWI for Voice Mail Configuration
Yealink IP phones support both solicited and unsolicited MWI.
Unsolicited MWI: The IP phone sends a SUBSCRIBE message to the server for message-summary updates. The server
sends a message-summary NOTIFY within the subscription dialog each time the MWI status changes. Unsolicited MWI
is a server related feature.
Solicited MWI: The IP phone can subscribe the MWI messages to the account or the voice mail number. For solicited
MWI, you must enable MWI subscription feature on IP phones.
The following table lists the parameters you can use to configure MWI for voice mail.
Parameter
account.X.subscribe_mwi
[1]
<MAC>.cfg
Description It enables or disables the IP phone to subscribe the message waiting indicator.
Permitted
Values
0 -Disabled, the server automatically sends a message-summary NOTIFY in a new dialog each time the
MWI status changes. (This requires server support).
1 -Enabled, the IP phone will send a SUBSCRIBE message to the server for message-summary updates.
Default 0
Web UI Account->Advanced->Subscribe for MWI
Parameter
account.X.subscribe_mwi_expires
[1]
<MAC>.cfg