Yealink W60P Telesystem, Руководство администратора

Страница: 195 / 264

Administrator’s Guide for W60P/W53P/W41P DECT Phones
188
Parameter static.security.user_name.var <y0000000000xx>.cfg
Description
It configures the user name of the var for phone’s web user interface access.
Note : It works only if “static.security.var_enable” is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default var
Parameter static.security.user_password <y0000000000xx>.cfg
Description
It configures the password of the user or administrator.
The IP phone uses “user” as the default user password and “admin” as the default administrator pass-
word.
The valid value format is <username> : <new password>.
Example :
static.security.user_password = user:123 means setting the password of user to 123.
static.security.user_password = admin:456 means setting the password of administrator to 456.
Note : IP phones support ASCII characters 32-126(0x20-0x7E) in passwords. You can set the password to
be empty via web user interface only.
Permitted
Values
String within 32 characters
Default Blank
Web UI Security->Password
User Access Level Configuration
For more information, refer to Yealink SIP IP Phones Configuration Guide for User Access Level .
The following table lists the parameters you can use to configure the user access level.
Parameter
static.security.var_enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the 3-level access permissions (admin, user, var).
Permitted Values
0 -Disabled
1 -Enabled
Default 0
Parameter
static.web_item_level.url
[1]
<y0000000000xx>.cfg
Description It configures the access URL of the file, which defines 3-level access permissions.
Permitted Values URL within 511 characters
Default Blank
Parameter
static.security.default_access_level
[1]
<y0000000000xx>.cfg
Description
It configures the default access level to access the handset user interface.
Note : It works only if “static.security.var_enable” is set to 1 (Enabled).
Permitted Values 0 -user