Yealink VC110, Руководство администратора

Страница: 155 / 233

Configuring Endpoint Settings
145
2. Enter the desired value in the Video MTU(1000-1500) field.
3. Press the Save soft key to accept the change.
The display device prompts ―Reboot now?‖.
4. Select OK to reboot the endpoint immediately.
To enhance the process of communicating with others over video, the dual-stream
protocol provides the ability to share content from a computer, such as video clips or
documentation. Both the video and the documentation can be transmitted to the far site
simultaneously, thus meeting the requirements of different conference scenarios, such
as training or medical consultation.
The Yealink video conferencing endpoint supports the standard H.239 protocol and
BFCP (Binary Floor Control Protocol). H.239 protocol is used when sharing content with
the far site in H.323 calls. BFCP protocol is used when sharing content with the far site in
SIP calls. Before enabling the desired protocol, ensure that the protocol is supported
and enabled by the far site you wish to call. If the far site does not support the protocol
for sharing content, MCU will automatically mix the content and camera video, and
send them in one channel. For more information on mix sending, refer to
Mix Sending on
page 146 .
Dual-stream protocol parameters on the endpoint are described below.
Parameter Description Configuration Method
H.239
Enables or disables the H.239
protocol for sharing content in
H.323 calls.
Default: Enabled
Web User Interface
BFCP
Enables or disables the BFCP
protocol for sharing content in SIP
calls.
Default: Disabled
Web User Interface
To configure dual-stream protocol via the web user interface:
1. Click on Setting->Video & Audio.
2. In the Presentation block, select the desired value from the pull-down list of H.239.