Yealink SIP-T40P, Руководство пользователя

Страница: 153 / 188

Advanced Phone Features
141
Paging Priority Active
The paging priority active parameter decides how the phone handles incoming multicast paging
calls when there is already a multicast paging call on the phone. If enabled, the phone will
ignore incoming multicast paging calls with lower priorities, otherwise, the phone will answer
incoming multicast paging calls automatically and place the previous multicast paging call on
hold. If disabled, the phone will automatically ignore all incoming multicast paging calls.
To configure multicast listening addresses via web user interface:
1.
Click on
Directory
->
Multicast IP
.
2.
Select the desired value from the pull-down list of
Paging Barge
.
3.
Select the desired value from the pull-down list of
Ignore DND
.
4.
Select the desired value from the pull-down list of
Paging Priority Active
.
5.
Enter the multicast IP address(es) and port number (e.g., 224.5.6.20:10008) which the phone
listens to for incoming RTP multicast in the
Listening Address
field.
6.
(Optional.) Enter the label in the
Label
field.
Label will appear on the LCD screen when receiving the multicast RTP stream.
7.
Select the desired channel to listen from the pull-down list of
Channel
.
The default channel is 0.
8.
Click
Confirm
to accept the change.
Note
The priorities of listening addresses are predefined: 1 with the highest priority, 31 with the lowest.
Multicast listening addresses are configurable via web user interface only.