Yealink MeetingSpace VC500, Руководство администратора

Страница: 63 / 281

VCS Deployment Method
47
1.
Select
More
->
Setting
->
Advanced
(default password: 0000) ->
NAT/Firewall
.
2.
Select the desired value from the pull-down list of
Type
.
3.
Configure the NAT public address in the
Public IP Address
field if
Manual Settings
is
selected from the pull-down list of
Type
.
4.
Select
Save
, and then press to accept the change.
To configure static NAT for SIP IP call via the remote control:
1.
Select
More
->
Setting
->
Advanced
(default password: 0000) ->
SIP IP Call.
2.
Select
StaticNat
from the pull-down list of
NAT Traversal
.
3.
Select
Save
, and then press to accept the change.
Route Traversal
If your environment has a secondary router connected to the first router, the VCS connected to
each router may not be able to communicate properly. In this situation, you can configure static
NAT and enable route traversal feature forcibly on the VCS that is connected to the secondary
router, so that the NAT works even though both devices are in the Intranet.
Note
Route traversal parameters on the system are described below:
Parameter Description Configuration Method
Static NAT
Select
Manual
, and then configure
the NAT address manually.
Remote Control
Web User Interface
NAT Public IP
Address
Configures the NAT address for the
system manually.
Remote Control
Web User Interface
Route Traversal
Configures the route traversal type.

Auto
—NAT works only when
making a call to a public
address. NAT does not work
when making a call to a private
address.

Compulsory
—NAT works no
matter you are making a call to
a public address or private
address.
Default:
Auto
Web User Interface
If you
enable route traversal forcibly,
the risk is that the VCS may fail to call the other VCS
connected to the same router, because the NAT address replaces the private address.