Yealink MeetingSpace VC500, Руководство администратора

Страница: 249 / 281

Configuring Security Features
233
3.
Click
Confirm
to accept the change.
System Integrated with Control Systems
The Yealink video conferencing systems provide an API interface for the third-party control
system. The API commands can be sent to Yealink video conferencing systems over LAN or
serial port, to realize controlling the Yealink video conferencing systems.
LAN Connection
: Make sure the Yealink video conferencing system and the control system
should be in the same network segment. API commands can be sent to video conferencing
system through TCP protocol. The control system needs to know the IP address and TCP port of
the Yealink video conferencing system.
Serial Connection
: You can use the API with a serial connection to control Yealink video
conferencing system. The USB port on the Yealink video conferencing system can be connected
to the serial port on the control system through a USB to RS-232 cable.
For more information, refer to
Yealink VC Deployment and User Manual for Control Systems
and
API Commands Introduction for Yealink Video Conferencing System
.
Control system parameters are described below.
Parameter Description Configuration Method
Current Control
TCP Port
Control TCP port (read-only).
Default:
6024
Web User Interface
Control Security
Enabled
Enables or disables an
authentication password when the
control system tries to connect to
the video conferencing system.
Default:
Enabled
Web User Interface
Control Security
Configures the authentication
Web User Interface