Yealink MeetingSpace VC500, Руководство администратора, Страница: 31 / 281

Configuring Network
15
Parameter DHCP Option Description
Vendor Class Identifier
60 Identifies the vendor type.
TFTP Server Name
66
Identifies a TFTP server when the 'name' field
in the DHCP header has been used for DHCP
options.
For more information on DHCP options, refer to RFC 2131 or RFC 2132 .
To make the system gather network settings via DHCP options, you need to contact your
network administrator to configure the DHCP server properly.
DHCP feature parameters on the system are described below:
Parameter Description Configuration Method
DHCP
Enables or disables the system to
obtain network settings from the
DHCP server.
Default:
Enabled
Note
: If you change this parameter,
the system will reboot to make the
change take effect.
Remote Control
Web User Interface
Host Name
Configures the host name of the
system.
Default:
Blank
Note
: When the system broadcasts
DHCP DISCOVER messages, it will
report the configured host name to
the DHCP server via DHCP option
12. Host name is optional, so it is not
a mandatory configuration item. For
more information, contact your
network administrator.
If you change this parameter, the
system will reboot to make the
change take effect.
Web User Interface
To configure DHCP via web user interface:
1.
Click on
Network
->
LAN Configuration
.
2.
In the
IPv4 Config
block, mark the
DHCP
radio box.