Yealink MeetingSpace VC500, Руководство администратора

Страница: 21 / 281

VC800/VC500 Video Conferencing System Introduction
5
need to know the user name and the administrator’s password. The default user name is “admin”
(case-sensitive), and the default password is “0000”. You can also access the web user interface
with user credential, which is disabled by default. For more information on how to enable the
user credential, refer to
User Mode on page 213 .
The system uses the HTTPS protocol to access the web user interface by default. For more
information on the access protocol for web user interface access, refer to
Web Server Type on
page 215 .
Log into the web user interface of the system:
1.
Enter the IP address (for example: 192.168.0.10) in the address bar of a web browser on
your computer, and then press the
Enter
key.
2.
Enter the administrator user name and password.
3.
Click
Login
.
After you log into the web user interface successfully, you can click
Logout
on the top
right corner of the web interface to log out.
Administrator has full permission to access every menu in the web user interface. User can log
into the web user interface with user credentials.
The web structure tree of VC800/VC500 is shown as below, (the red highlight is hidden for users
with user credentials):
You can monitor or place calls via web user interface. You can do the following in the
Home
page.

Placing or ending calls

Viewing remote and nearby sites

Enabling the mute mode or the DND mode for a call

Changing the video input source

Adjusting the position and focus of the camera

Moving local camera to a preset position