YATO YT-30436, Руководство пользователя

Страница: 16 / 88

ORIGINAL INSTRUCTIONS
16
EN
ing in this mode, press and hold the power switch for more than 2 seconds. In this mode, the accuracy
is not maintained and the laser beam will pulsate every 5 seconds.
Pulse mode
After starting the device, press the switch to move to the following pulse modes: continuous pulse
mode and external pulse mode. The pulse modes are used to work with laser radiation detectors and
are particularly useful when working outdoors or in very brightly lit rooms.
With the laser switched on and the lock shifted towards the padlock symbol, press the on/o ff switch
to activate the continuous pulse mode.
Press and hold the switch for approx. 2 seconds, with the lock moved towards the open padlock
symbol to activate the external pulse mode. The laser beams will fl ash 5 times and the pulse mode
indicator light will be illuminated in blue. To exit this mode press and hold the switch for approx. 2
seconds, with the lock moved towards the open padlock symbol. The laser beams will fl ash 5 times
and the pulse mode indicator light will go out
Mounting the product on the tripod
The base of the product is equipped with a threaded opening which allows the product to be mounted
on a tripod (available separately) or in the handle supplied with the product.
If the supplied handle is used, screw the handle screw into the product opening as far as possible in
the device’s bottom wall. The product mount is equipped with magnets which can be used to attach
the handle to ferromagnetic surfaces.
If the product is mounted on a tripod, please refer to the information supplied with the tripod.
Product use
If the product is used outdoors or in the presence of a strong light source such as sunlight, the working
range and visibility of laser lines may be reduced.
An example of product use is shown in the fi gures.
PRODUCT MAINTENANCE AND STORAGE
After fi nishing work, wipe the product with a soft, slightly damp cloth removing possible impurities
created during operation. After cleaning, dry with a soft cloth or leave to dry. Do not immerse the