YATO YG-20015, Руководство пользователя

Страница: 15 / 44

O P E R A T I N G I N S T R U C T I O N S
15
MAINTENANCE, STORAGE AND TRANSPORT
Having fi nished using the grill, close the valves of all burners and then close the valve on the gas
cylinder and disconnect it from the grill. Wait until all the elements of the grill cool down. The grate,
the tray, and the burner covers should be cleaned after each use with agents intended for cleaning
grills or ovens. It is not recommended to use sharp metal objects to clean the dried food residues.
Clean the other elements of the grill with a cloth or sponge and commercially available detergents
intended for cleaning metal surfaces.
Check the condition of the gas installation, in particular the burners, before each use, and if rust
or damage is observed replace the defective elements with new ones. For that purpose, please
contact the manufacturer’s authorized service.
Check the condition of the fl exible hose before each use. If any damage or wear of the hose is ob-
served, replace it with a new one. A periodic replacement of the hose is recommended not at least
every 10 years, even if no signs of wear are found.
Before storing the grill, make sure whether all gas regulators have been set in the “closed” posi-
tion. Close the valve on the gas cylinder and disconnect it from the grill. It is forbidden to store the
grill with the gas cylinder connected. The grill and the gas cylinder must be stored in dry and dark
rooms, secured against unauthorized access. Store the grill in places free from dust. During stor-
age, all the burner covers must be closed. For an extended storage, for example during the winter
time, it is recommended to cover the grill to protect it against dirt and dust. Provide good ventilation
in the storage place, which will prevent accumulation of moisture on the appliance elements, which
may result in corrosion. Corrosion can cause the change in the gas installation characteristics,
which can lead to an uncontrolled gas fl ow and cause fi re or explosion.
Do not cover the ventilation openings in the premises for gas cylinder storage. Accumulation of gas
can result in fi re or explosion.
Transport the grill by short distances (several meters) using the attached wheels. If the transport of
the grill by signi fi cant distances is required using separate transportation means, disassemble the
grill, transport it in the factory packaging, and re-assemble it again. It is forbidden to transport the
grill by any distance with the gas cylinder connected. Before the transport close the valve on the
gas cylinder and disconnect it from the grill.
Valve closed
Small fl ame height
Magneto
Maximum fl ame height
17. gas hose (not included - sold separately)
18. pressure regulator (not included - sold separately)
XXXII
XXXIII
17
17
18
16