YASKAWA
TOEPC71061782C GA800 Drive Installation & Primary Operation
33
Symbol
Name
Function
L
Clock Battery Cover
Remove this cover to install or replace the clock battery.
Note:
•
The battery included with the keypad is for operation check. It may be exhausted earlier than the expected battery life described in the
manual.
•
Refer to
“
Maintenance & Troubleshooting Manual (TOEPYAIGA8001)
”
for details on replacement procedure.
To replace the battery, use a Hitachi Maxell
“
CR2016 Lithium Manganese Dioxide Lithium Battery
”
or an equivalent battery with these
properties:
•
Nominal voltage: 3 V
•
Operating temperature range: -20 °C to +85 °C (-4 °F to +185 °F)
M
Insulation Sheet
An insulating sheet is attached to the keypad battery to prevent battery drain. Remove the insulation sheet before you use the keypad for the
first time.
N
Nameplate
Shows the model number of the keypad and other information
Note:
• “
REV
”
identifies the hardware and software version of the keypad.
• “
FLASH
”
identifies the version of the flash memory.
WARNING
Sudden Movement Hazard. If you change the control source when b1-07 = 1 [LOCAL/REMOTE Run Selection =
Accept Existing RUN Command], the drive can start suddenly. Before you change the control source, remove all personnel from the
area around the drive, motor, and load. Sudden starts can cause serious injury or death.
