• An SGD7
-
B SERVOPACK has the specifica-
tions that were registered by the customer with the MechatroCloud service.
Confirm the registered specifications before you attempt to use the SERVO-
PACK.
• Before starting operation with a machine connected, change the settings of the
switches and parameters to match the machine.
• Do not radically change the settings of the parameters.
• Install limit switches or stoppers at the ends of the moving parts of the
machine to prevent unexpected accidents.
• For trial operation, securely mount the Servomotor and disconnect it from the
machine.
• Forcing the motor to stop for overtravel is disabled when the Jog (Fn002), Ori-
gin Search (Fn003), or Easy FFT (Fn206) utility function is executed. Take
necessary precautions.
• When an alarm occurs, the Servomotor will coast to a stop or stop with the
dynamic brake according to the SERVOPACK Option specifications and set-
tings. The coasting distance will change with the moment of inertia of the load
and the resistance of the External Dynamic Brake Resistor. Check the coasting
distance during trial operation and implement suitable safety measures on the
machine.
• Do not enter the machine’s range of motion during operation.
• Do not touch the moving parts of the Servomotor or machine during operation.
E-9
Operation Precautions
WARNING
If you just turn ON the power supply to the SERVOPACK, unexpected opera-
tion may occur, and machine damage or personal injury may occur.
Unexpected machine operation, failure, or personal injury may occur if opera-
tion is started before appropriate settings are made.
There is a risk of unstable operation, machine damage, or injury.
There is a risk of machine damage or injury.
There is a risk of injury.
There is a risk of machine damage or injury.
There is a risk of injury.
There is a risk of injury.
