YASKAWA S-7 Series Скачать руководство пользователя страница 20

Страница: 20 / 71

2 Installation

E-18

*2. Refer to the following section for derating specifications.





Derating Specifications

on page 19

Observe the following precautions when you install the SERVOPACK.



Installation in a Control Panel

• Design the size of the control panel, the SERVOPACK installation location,

and the cooling method so that the temperature around the SERVOPACK

meets the environmental conditions given on the previous page.

• If you install more than one SERVOPACK together, provide space between

any two adjacent SERVOPACKs and install a fan above the SERVOPACKs.

Also, provide space above and below the SERVOPACKs.



Installation Near Sources of Heat

Implement measures to prevent temperature increases caused by radiant or con-

vection heat from heat sources so that the temperature around the SERVO-

PACK meets the environmental conditions.



Installation Near Sources of Vibration

Install a vibration absorber on the installation surface of the SERVOPACK so

that the SERVOPACK will not be subjected to vibration.



Installation in Locations Subject to Corrosive Gas

Implement measures so that corrosive gas does not enter the SERVOPACK.

Although corrosive gas will not immediately affect the SERVOPACK, it may

cause the SERVOPACK or contact devices to fail in the future.



Other Precautions

• Do not install the SERVOPACK in a location subject to high temperatures,

high humidity, water drops, cutting oil, excessive dust, excessive dirt, exces-

sive iron powder, corrosive gasses, or radioactivity.

• Do not subject the SERVOPACK to freezing or condensation.
• To ensure long-term reliability, use the SERVOPACK at a surrounding air

temperature of 45



C or lower.

Содержание S-7 Series








































































Результаты поиска

Содержание S-7 Series

Отзывы:

Похожие инструкции для S-7 Series

Бренды по названию

Популярные бренды

YASKAWA S-7 Series, Руководство пользователя

Результаты поиска

Содержание S-7 Series

Отзывы:

Похожие инструкции для S-7 Series

Бренды по названию

Популярные бренды