YASKAWA RM2-755-RDR, Инструкция по эксплуатации

Страница: 35 / 104

2-15
183523-1CD
183523-1CD
2 Installation
2.4 Customer-Supplied Tooling Fixtures
RM2-755-RDR Postioner
2.4 Customer-Supplied Tooling Fixtures
The Positioner is equipped with a MotoMount™ tool mounting system
(see
Fig. 1 - 1 “Positioner Assembly” on page 1-2
). MotoMount is a flexible
tool mounting system for headstock / tailstock style Positioners, such as
the Positioner. MotoMount provides improved part presentation
repeatability compared to traditional hard-mounted systems.
The MotoMount system also minimizes headstock / tailstock bearing loads
induced by tooling and headstock / tailstock misalignment (up to a
maximum of ±2 degrees), transmitting only the predictable moment loads
resulting from simple beam loading.
For additional information on the correct use and care of the MotoMount
tool mounting system, please contact Customer Support.
(Refer to
section 1.4 “Customer Support Information” on page 1-5
).
2.5 Installation of Safeguarding
NOTICE
The customer shall supply all tooling fixtures for the Positioner.
YASKAWA recommends application of a corrosion/rust preventive
compound to tooling fixtures located in a high-humidity environment.
WARNING
• Install all safeguarding.
Failure to observe this warning may result in injury or damage.
• Install the Positioner in a location where the Positioner with a jig
does not hit against anything such as the wall or the safeguarding.
Failure to observe this warning may result in injury or damage.
• Do not start operating the Positioner or turn ON the power before it
is firmly anchored.
The Positioner may overturn and cause injury or damage.
CAUTION
• The Positioner system should be installed by qualified personnel
who are familiar with the installation and setup of a robotic system.
Failure to observe this caution may cause injury or damage.
• Do not install or operate a Positioner that is damaged or lacks parts.
Failure to observe this caution may cause injury or damage.
35 of 104