CAUTION!
–
Before installing or overhauling single components res. the whole
system, the power supplies must be disconnected from voltage (pull
the plug or remove the fuse)!
–
Installation and modifications only by properly trained personnel!
–
During operation the DC 24V LED is on. An error is indicated if the
LED gets of or blinks.
–
The usage out of the adjusted mains input voltage can damage the
power supply.
–
Durably exceeding the maximum total current the lifespan of the
power supply is affected.
VIPA System 300
Power supply PS 307
PS 307-1EA00
HB130 | PS | 307-1xA00 | en | 18-01
27
