CAUTION!
–
The power supplies must be released before installation and repair
tasks, i.e. before handling with the power supply or with the cabling
you must disconnect current/voltage (pull plug, at fixed connection
switch off the concerning fuse)!
–
Installation and modifications only by properly trained personnel!
The power supply is provided with AC voltage by means of the input slot.
Please note before start-up that the input voltage corresponds to the
adjusted value at the mains voltage selector switch!
The main supply cable should always be fixed by means of the strain relief!
To protect the main supply lines, you should install a miniature circuit-breaker of the fol-
lowing rating:
n
Rated current at AC 230V: 10A
n
Tripping characteristics: C
Circuit diagram
Input AC 120/230V
Line protection
VIPA System 300
Power supply PS 307
PS 307-1KA00
HB130 | PS | 307-1xA00 | en | 18-01
31
