1
Status LED
2
ON/OFF switch
The following components are beneath a flap:
3
AC IN 100 ... 240V
4
DC OUT 24V, 2.5A
CAUTION!
–
The power supplies must be released before installation and repair
tasks, i.e. before handling with the power supply or with the cabling
you must disconnect current/voltage (pull plug, at fixed connection
switch off the concerning fuse)!
–
Installation and modifications only by properly trained personnel!
You have to provide the power supply with alternating voltage via the input slot. A melting
fuse protects the input against overload.
To protect the main supply lines, you should install a miniature circuit-breaker of the fol-
lowing rating:
n
Rated current at AC 230V: 6A
n
Tripping characteristics: C
Structure
Circuit diagram
Input AC 100...240V
Line protection
VIPA System 300
Power supply PS 307
PS 307-1BA00
HB130 | PS | 307-1xA00 | en | 18-01
20
