On delivery the power supply is adjusted to AC 230V input voltage. At the front side of the
power supply there is a mains voltage selector switch to switch input voltage to AC 120V.
1.
For this remove the transparent plastic cover by means of a screwdriver.
2.
Now you can select the requested input voltage with the screwdriver, too.
3.
Fix again the transparent plastic cover, now.
Here DC 24V can be picked up via quadruple terminal. The outputs are protected against
short circuit. Please note that the sum current may not exceed maximally 10A.
At the front there is a green LED labeled with "DC 24V" which serves the error diagnos-
tics. The following conditions can be indicated:
LED
Description
green
There is no error, DC 24V output voltage is present.
off
There is a short circuit at the secondary side or undervoltage on primary
side or the power supply is damaged.
blinks
The sum of the individual currents exceeded the maximum total current of
10A.
Mains voltage selector
switch
Output DC 24V, 10A
LED
VIPA System 300
Power supply PS 307
PS 307-1KA00
HB130 | PS | 307-1xA00 | en | 18-01
32
