YASKAWA iC9200 Series, Руководство по эксплуатации, Страница: 199 / 220

HB700 | CPU | PMC921xEx | en | 24-04 199
iC9200 Series
Web-based management - WBM
Security > Syslog Configuration
Create Syslog server desti-
nation
Syslog Configuration
Security
Security
Certificate Authentication
Firewall
SD Card
Syslog Configuration
User Authentication
Information
Diagnostics
Configuration
Administration
iC92...
PMC92...
1. To create a Syslog server destination, click at at the bottom of the table.
🡆
The dialog for configuring a Syslog server destination opens.
2. Under ‘General Options’ enter the following parameters:
■
Host Name
–
Host name respectively IP address of the Syslog server to which the log data
is to be sent.
■
Protocol
–
Transmission protocol to the server. TLS is recommended for secure trans-
mission; for this purpose, a trust store must be defined for verification. This
can be done via
⮫
‘Certificate Authentication’...page 190 .
You can specify the corresponding Trust Store at ‘Trust Store’ .
■
Port
–
Port over which the communication with the Syslog server is to take place.
Ensure that the port is enabled in the firewall settings for outgoing requests.
⮫
‘Firewall’...page 193