YASKAWA iC9200 Series Скачать руководство пользователя страница 116

Страница: 116 / 220

116

HB700 | CPU | PMC921xEx | en | 24-04

Deployment CPU iC921xM-FSoE

iC9200 Series

Commissioning > Notes on commissioning

WARNING
Safety function only ensured after validation

−

The planned safety function of the plant/machine is only ensured after

validation.

WARNING
Organizational or technical measures required for compensation of the CRC

checksum
Take technical or organisational measures to ensure that the correct project

for the application is started in the CPU by comparing the CRC checksum:

⮫

‘Comparison of the checksums’...page 123

−

After transferring a project to the CPU.

−

A valid but incorrect project for the application could be loaded.

−

After removing the SD card.

−

There could be a valid project in the internal memory but the incorrect

one for the application.

−

After inserting or changing the SD card.

−

There could be a valid project on the SD card but the incorrect one for

the application.

If you use a technical measure to check the CRC checksum, it must be

implemented in such a way that the check done by a third technical instance

outside the safety CPU.

WARNING
Safety and availability of the plant/machine

−

Ensure the safety and availability of your plant/machine by selecting the

appropriate watchdog time FSoE_WD_Time.

−

Select the watchdog time high enough so that the safety of your plant/

machine is still guaranteed with the highest possible availability.

WARNING
Avoid danger caused by triggering the safety function too late

−

Ensure that the maximum permissible values TI

FSoEWD_MAX

and

FSoEWD_MAX

are not exceeded.

⮫

‘Maximum permitted watchdog

times’...page 134

WARNING
Debug operation

−

Switching to debug operation means leaving normal operation.

−

Make sure that your plant/machine does not pose any danger to people

during debug operation and that no damage can be caused.

NOTICE
Acclimatization before start-up
Make sure that commissioning only takes place after the CPU and the associ-

ated modules have acclimatized!

Содержание iC9200 Series





























































































































































































































Результаты поиска

Содержание iC9200 Series

Отзывы:

YASKAWA iC9200 Series, Руководство по эксплуатации, Страница: 116 / 220

Результаты поиска

Содержание iC9200 Series

Отзывы: