8.6 Anti-Resonance Control Adjustment
8.6.3 Operating Procedure
8-26
3.
If you do not know the vibration frequency, click the
Auto Detect
Button. If you know the
vibration frequency, click the
Manual Set
Button.
4.
Click the
Start adjustment
Button.
5.
Use the
and
Buttons in the
Adjustment
Area to change the settings.
Click the
Reset
Button during tuning to restore the setting to its original value. The tuning level will
return to the value from before when custom tuning was started.
6.
When the adjustment has been completed, click the
Finish
Button.
The values that were changed will be saved in the SERVOPACK and you will return to the Tuning Dia-
log Box.
This concludes the procedure.
To Automatically Detect the Vibration
Frequency
The frequency will be set.
To Manually Set the Vibration Frequency
To Automatically Detect the Vibration
Frequency
Change the setting of the damping gain.
To Manually Set the Vibration Frequency
Change the settings of the frequency and
damping gain.
