Yardline OAKRIDGE 8 x 12, Инструкция по сборке

Страница: 45 / 88

43
BEGIN
1
HINT:
Clamp in position
before screwing.
1-1/4" (3,2 cm)
Screws
3" (7,6 cm)
Screws
BACK GABLE TRIM
FINISH
4
Position one
WW
flush to back gable panel edge and center with panel
seam
(Fig. A)
. Attach trim with ten 1-1/4" screws from inside
approximately 7" (17,8 cm) apart.
Position second
WW
flush to panel edge and flush to
WW
already attached
(Fig. A)
.
Attach trim with ten 1-1/4" screws from inside approximately 7" (17,8 cm) apart.
Reinforce
WW with one 3" screw through loft support at each end
(Fig. B)
.
You have finished attaching your back gable trim.
2
3
PARTS REQUIRED:
1-1/4" (3,2 cm)
WW
Fig. A
Fig. B
7"
(17,8 cm)
Flush
Flush with panel edges.
Flush with
panel edges.
x2
2 x 4 x 69-7/8" (5,1 x 10,2 x 177,5 cm)
WW
x20
x2
3" (7,6 cm)