Yardline OAKRIDGE 8 x 12, Инструкция по сборке

Страница: 13 / 88

11
DOO
R
DOO
R
48"
(121,9 cm)
140-5/8"
(352,2 cm)
6"
(15,2 cm)
Move to the opposite side. Using the long edge of the panel as a lever, move the
panel side-to-side until the top corner is flush to the floor frame
(Fig. B)
.
Secure panel with two 2" nails in the corners.
2
BEGIN
1
3
4
Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
Ensure your floor frame is square by installing one panel
and squaring frame.
Fig. A
Fig. B
Fig. C
Check the floor frame is square by measuring diagonally across the frame corners. If the measurements are the
same your floor frame is square. The measurement will be approximately 170-1/4" (432,4 cm) (Fig. C) .
PARTS REQUIRED:
x1
x62
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
Grid lines up
Seam
Seam
12"
(30,2 cm)
2" (5,1 cm)
Flush
Flush
Flush
(2) Nails
(2) Nails
FLOOR PANELS
3/4"
(1,9 cm)
DOOR
170-1/4"
(432,4 cm
170-1/4"
(432,4 cm
Attach the 48 x 96" panel with the rough side up (painted-grid lines side) with the 48"
edge and corner flush to the floor frame (Fig A) . Secure panel with two 2" nails in the
corners.