Yardline OAKRIDGE 8 x 12, Инструкция по сборке

Страница: 31 / 88

Set back wall on side wall top plates and secure using two 3" screws on each side (Fig A) . Set back wall on side wall top plates and secure using two 3" screws on each side (Fig A) .
1
You have finished standing your back wall.
FINISH
6
29
BACK WALL INSTALLATION
3" (7,6 cm)
2" (5,1 cm)
x17
x14
x26
1-1/2" (3,8 cm)
PARTS REQUIRED:
2
Nail lower edge of panel to floor using 2" nails 6" apart. Angle nail to hit floor frame (Fig. B) .
ENSURE WALL IS CENTERED ON FLOOR BEFORE NAILING.
Secure back wall upright to floor using two 3" screws (Fig. C) .
Nail back wall panel to side wall stud using 1-1/2" nails at 6" apart.
Secure the two back wall center horizontal 2 x 3" shelf supports using two 3" screws into back
wall frame at an angle as shown (Fig. D) .
3
4
5
BEGIN
Stand back wall on floor.
It is important to secure the back wall in the following order.
6"
(15,2 cm)
(2) 3" (7,6 cm)
Screws
(2) 3" (7,6 cm)
Screws
(2) 3" (7,6 cm)
Screws
Fig. A
Flush
Fig. B
2" (5,1 cm)
Nail
2" (5,1 cm)
Nails
1-1/2"
(3,8 cm) Nails
1-1/2"
(3,8 cm) Nails
Fig. C
Fig. D
Nail 2" nails first.
DOOR
BE SURE TOP PLATES ARE FLUSH.