![background image](http://html1.mh-extra.com/html/yard-force/er-u45/er-u45_original-instructions-manual_905830008.webp)
8
Operation
1. Before starting the machine, look into the feeding
hopper to make certain that it is empty.
2. Keep your face and body away from the feeding
hopper's opening.
3. Do not allow hands or any other part of the body or
clothing inside the feeding hopper, discharge chute,
or near any moving part.
4. Disconnect the machine from the mains, if the cord
becomes damaged or entangled during use.
5. Keep proper balance and footing at all times, to
always be sure of the footing on slopes and to walk,
never run. Do not overreach. Never stand at a higher
level than the base of the machine when feeding
material into it.
6. Always stand clear of the discharge zone when
operating this machine.
7. When feeding material into the machine be extremely
careful that pieces of metal, rocks, bottles, cans or
other foreign objects are not included.
8. If the cutting mechanism strikes any foreign objects or
if the machine should start making any unusual noise
or vibration, shut off the power source and allow the
machine to stop. Disconnect from supply and take the
following steps:
• Inspect for damage.
• Check for and tighten any loose parts.
• Have any damaged parts replaced or repaired with
parts having equivalent specifications.
9. Unplug the machine from the mains, if the cord
becomes damaged or entangled during use.
GENERAL SAFETY WARNINGS