![background image](http://html1.mh-extra.com/html/yard-force/er-u45/er-u45_original-instructions-manual_905830017.webp)
17
2.
Press the reset button (12), then the green ON button (10) to restart the motor.
Emptying the collection bin
Empty the collection bin (17) when it is full.
1. Switch off the shredder.
2.
Push the locking lever (4) down.
3. Pull the collection bin (17) out and empty it.
4.
Put the collection bin (17) back and push the locking lever (4) up.
Note: The shredder will not start if the locking lever (4) is pushed down.
Removing blockage
WARNING!
Always use a hook or a stick to remove jammed material.
Never put your hands into the feeding hopper.
WARNING!
The shredder must be unplugged and completely
stops before opening the cutting blade cover to remove jammed material.
OPERATION
Resetting the shredder
1.
This shredder is equipped with an overload protection. When the cutting blade is
jammed, the motor will switch OFF automatically.
3.
Press the forward/reverse button to
position and press the green ON button (10)
continuously for reverse turning direction. The shredder will stop turning reversely when the
green ON button (10) is released.
Adjusting the cutting blade clearance
WARNING!
Ensure the product is turned on and working in normal
forward direction. Adjusting the shaving plate while the motor is turned off
could lead to serious damage of the product.
1.
Switch on the device.
2.
Slowly turn the adjusting screw
clockwise to decrease the gap and
anti-clockwise to increase the gap.
If the product fails to shred material, the shaving plate may need adjusting.