16
ASSEMBLY
Figure B to F
1.
Mount the feet (3) on the base frame (16) with the screws provided.
2.
Insert the wheel axle (21) through the holes in the base frame (16), then insert
the inner washers (18) onto each end of the wheel axle (21).
3.
Insert the two wheels (2) onto the wheel axle (21), place the outer washers
onto the wheel axle and secure the wheels with the cotter pins (20).
4.
Place the wheel caps (2) onto the wheels (1) and click in place.
5.
Mount the shredder unit (15) on the base frame (16) and secure with the
screws provided.
6.
Push the locking lever (4) down and Insert the collection bin (17), then push
the locking lever (4) up.
WARNING!
Garden material greater than 4
5
mm in diameter
should not be fed into the shredder.
Switching on/off
1.
Press the green ON button (10) to switch on the shredder and press the red OFF button
(11)
to switch off.
2.
The power on indicator (13) will be on when the shredder is switched on.
Note: The shredder cannot be switched on if the locking lever (4) on the collection bin
(17) is
pushed down.
OPERATION
Forward/Reverse button
ON/OFF switch
Reset button
Fig.1
Changing turning direction
WARNING!
Switch off the shredder and wait till the shredder
completely stop before changing the forward/reverse direction.
1.
The cutting blade can rotate in reverse direction to release jammed material.
2.
Press the forward/reverse button to position for forward turning direction.