10
GENERAL SAFETY WARNINGS
Maintenance and storage
1. When the machine is stopped for servicing,
inspection, or storage, or to change an accessory,
shut off the power source, disconnect from supply,
make sure that all moving parts have come to a
complete stop and, where a key is fitted remove the
key. Allow the machine to cool before making any
inspections, adjustments, etc.
2. Always allow the machine to cool before storing.
3. When servicing the cutting means be aware that,
even though the power source will not start due to the
interlock feature of the guard, the cutting means can
still be moved by a manual starting mechanism.
4. Keep the motor cooling vents clean of debris and
other accumulations to prevent damage to the motor
or possible fire.
5. Check the supply and any extension cord regularly for
damage or signs of ageing. Do not use the appliance,
if the cords are damaged.
6. Never attempt to override the interlock feature of the
machine.
Residual risks
Although the safety instructions contain extensive
instructions on safe working with this machine and
despite proper use, additional residual risks may arise
when using this machine. These include:
1. Injuries caused by touching any rotating/moving parts.
2. Injuries caused when changing any parts and
accessories.
3. Injuries caused by projected parts or tool adapter that
