Yanmar YDG Series Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 92

background image

SAFETY

YDG Operation Manual

7

34127

CAUTION

Flying Object Hazard

• Avoid personal injury. Always

wear eye protection when
servicing the generator set or
when using compressed air or
high-pressure water. Dust, flying
debris, compressed air,
pressurized water or steam may
injure your eyes.

• Avoid personal injury. Always wear eye

protection when servicing the engine or when
using compressed air or high-pressure water.
Dust, flying debris, compressed air,
pressurized water or steam may injure your
eyes.

Poor Lighting Hazard

Avoid personal injury or equipment damage.
Ensure that the work area is adequately
illuminated. Always install wire cages on
portable safety lamps.

Tool Hazard

Avoid personal injury or equipment damage.
Always use tools appropriate for the task at
hand and use the correct size tool for loosening
or tightening machine parts.

Before starting the engine, always turn the
switches on the working appliances (lighting
apparatus, motor, etc.) to their OFF position. If
the switches are not OFF, the sudden
application of load when the engine is started
could be very dangerous.

NOTICE

Never attempt to modify the generator set design or
safety features such as defeating the engine speed
limit control or the diesel fuel injection quantity
control.

Modifications may impair the generator set’s safety
and performance characteristics and shorten the
generator set’s life. Any alterations to this generator
set may avoid its warranty. Always use YANMAR
genuine replacement parts.

Always be environmentally
responsible.
Follow the guidelines of the
governmental agencies for the proper
disposal of hazardous materials such

as engine oil, and diesel fuel. Consult the local
authorities or reclamation facility.

Contact your authorized YANMAR industrial engine
dealer or distributor if you need to operate the
engine at high altitudes. At high altitudes the engine
will lose power, run rough, and produce exhaust
gases that exceed the design specifications.

• Always use correct polarity when you connect

battery cables to the battery. This generator uses
a negative ground, 12 VDC starting system.

• Make sure battery terminals are clean.

• Make sure cable connections are tight.

• Always shut down engine before removing or

attaching battery cables.

«
...
19
20
21
22
23
...
»

Содержание YDG Series





























































































Отзывы:

Нет отзывов

Похожие инструкции для YDG Series

Бренд: Akai Страницы: 48

Бренд: Sealey Страницы: 4

Architectual AM15

Бренд: Martin Audio Страницы: 1

Бренд: Sun-Mate Страницы: 14

Бренд: LIPOWER Страницы: 10

Бренд: mikroElektronika Страницы: 3

Music Angel 12022

Бренд: QooPro Страницы: 4

Бренд: Toyama Страницы: 52

Бренд: Philips Страницы: 3

Бренд: Philips Страницы: 3

Бренд: Philips Страницы: 3

Бренд: Philips Страницы: 5

Бренд: Micro Innovations Страницы: 2

DUROSTAR DS11000DX

Бренд: DUROMAX Страницы: 84

Бренд: Honda Страницы: 35

envaya DSB50BT, envaya DSB150BT, envaya DSB250BT

Бренд: Denon Страницы: 42

Бренд: Queen Bee Power Страницы: 1

Бренд: Magnum Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды