Yanmar BY series, Руководство по установке

Страница: 12 / 33

Electronic Control System: Installation Manual for BY Series Engines with Classic Controls
Page 11
Installation
Install the Tachometer
Mount the Tachometer using the cut out template on page 1 or 1 to insert the
connector marked J tachometer on the CE00XX engine cable. If no other gauges
are being used, individually tape back the other wires in the CE00XX harness for
future use.
If optional gauges are being installed see Appendix B of this manual.
Back of Tachometer
Install the Helm Components
The following items are supplied as part of kit CP100K. Locate an appropriate place and mount each item
near the helm. The audible alarm should be mounted behind the helm so it is out of the weather.
•
Key Switch
•
Lanyard Switch
•
Indicator LED
•
Audible Alarm
Key Switch
(front and back)
Indicator LED
(front and back)
Lanyard on
Cut-off Switch
Cut-off Switch
(front and back)
Audible Alarm
When the parts are mounted connect the items to the CE500XX cable as shown in the diagram.