background image

ENGLISH

1

ENGLISH

FRAN

ÇAIS

ESPAÑ

O

L

INTRODUCTION

Thank you for purchasing a Honda engine! We want to help you 
to get the best results from your new engine and to operate it 
safely. This manual contains information on how to do that; 
please read it carefully before operating the engine. If a problem 
should arise, or if you have any questions about your engine, 
consult an authorized Honda servicing dealer.

All information in this publication is based on the latest product 
information available at the time of printing. Honda Motor Co., 
Ltd. reserves the right to make changes at any time without 
notice and without incurring any obligation. No part of this 
publication may be reproduced without written permission.

This manual should be considered a permanent part of the engine 
and should remain with the engine if resold.

Review the instructions provided with the equipment powered by 
this engine for any additional information regarding engine 
startup, shutdown, operation, adjustments or any special 
maintenance instructions.

United States, Puerto Rico, and U.S. Virgin Islands:
We suggest you read the warranty policy to fully understand its 
coverage and your responsibilities of ownership. The warranty 
policy is a separate document that should have been given to you 
by your dealer.

SAFETY MESSAGES

Your safety and the safety of others are very important. We have 
provided important safety messages in this manual and on the 
engine. Please read these messages carefully.

A safety message alerts you to potential hazards that could hurt 
you or others. Each safety message is preceded by a safety alert 
symbol 

 and one of three words, DANGER, WARNING, or 

CAUTION.

Each message tells you what the hazard is, what can happen, 
and what you can do to avoid or reduce injury.

DAMAGE PREVENTION MESSAGES

You will also see other important messages that are preceded by 
the word NOTICE.

This entire book is filled with important safety 
information – please read it carefully.

©

2019 Honda Motor Co., Ltd. –All Rights Reserved

iGXV700 

 iGXV800

37ZEB601
00X37-ZEB-6010

These signal words mean:

You WILL be KILLED or SERIOUSLY 
HURT if you don’t follow instructions.

You CAN be KILLED or SERIOUSLY 
HURT if you don’t follow instructions.

You CAN be HURT if you don’t follow 
instructions.

This word means:

Your engine, other property, or the environment can 
be damaged if you don't follow instructions.

OWNER’S MANUAL

MANUEL DE L’UTILISATEUR

MANUAL DEL PROPIETARIO

iGXV700 

 iGXV800

CONTENTS

The engine exhaust from this product

contains chemicals known to the State of

California to cause cancer, birth defects

or other reproductive harm.

INTRODUCTION...................1

SAFETY MESSAGES.............1

SAFETY INFORMATION ........2

SAFETY LABEL LOCATION....2

COMPONENT & CONTROL 

LOCATION ..........................3

FEATURES ..........................3

BEFORE OPERATION 

CHECKS .............................3

OPERATION ........................4

SAFE OPERATING 

PRECAUTIONS..................4

STARTING THE ENGINE .....4

STOPPING THE ENGINE .....5

SETTING ENGINE SPEED....5

SERVICING YOUR ENGINE ....5

THE IMPORTANCE OF 

MAINTENANCE.................5

MAINTENANCE SAFETY ....5

SAFETY PRECAUTIONS .....6

MAINTENANCE 

SCHEDULE .......................6

REFUELING.......................6

Recommended Fuel.........6

ENGINE OIL ......................7

Recommended Oil...........7

Oil Level Check ..............7

Oil Change.....................7

AIR CLEANER ................8

Inspection......................8

Cleaning........................8

SPARK PLUG ....................9

HELPFUL TIPS & 

SUGGESTIONS ....................9

STORING YOUR ENGINE ....9

TRANSPORTING ............. 10

TAKING CARE OF 

UNEXPECTED PROBLEMS ... 11

TECHNICAL INFORMATION... 12

Serial Number Location .... 12

Battery Connections for 

Electric Starter ................ 12

Emission Control System 

Information..................... 13

Air Index ........................ 14

Specifications ................. 14

Tuneup Specifications...... 15

Quick Reference 

Information..................... 15

Wiring Diagrams.............. 15

CONSUMER INFORMATION...16

Warranty and 

Distributor/Dealer Locator 

Information..................... 16

Customer Service 

Information..................... 16

37ZEB6010.fm  Page 1  Tuesday, June 25, 2019  11:55 AM

Summary of Contents for iGXV700

















































Reviews: